Shahverdi, H.; Khalafi, V. Bifurcation analysis of fg curved panels under simultaneous aerodynamic and thermal loads in hypersonic flow. Arun, M.P. Advanced study of thermal management and analysis of wedge strut for scramjets. In Proceedings of the 2015 Online International Conference on Green Engineering and Technologies (IC-GET), Coimbatore, India, 27 November 2015; pp. 1–5. Zhao, C.; Zhao, M.; Shahid, M.; Wang, M.; Pan, W. Restrained tgo growth in YSZ/nicraly thermal barrier coatings by modified laser remelting. When a customer doesn’t know the estimated load, we assess the project and provide several scaling options depending on our experience with previous projects.

development of high-load systems

This button displays the currently selected search type. When expanded it provides a list of search options that will switch the search inputs to match the current selection.

Automating the First Touch with Customers through a Dedicated Chatbot

High load systems can easily adapt to any changes introduced during the software development process. High load systems show amazing performance indicators. This powerful software is capable of processing connections and requests just in the blink of an eye. Decade-long tech partnership and dozens of projects across web and mobile design and development, data ETL pipelines, third-party integrations, etc. There’s a performance ETL pipeline that collects metrics from edge nodes, runs them through a Logstash pipeline to Elasticsearch platform for data analytics, visualization and reporting. Customer data goes through another pipeline.

In each case, the solution focuses on business requirements. A highly loaded project must necessarily be scalable to meet users’ needs. The solution in this area meets the tasks of processing additional traffic, can easily increase storage capacity, perform transactions beyond current capabilities. Comparing Figure 8 with Figure 18, the two are the output waveforms obtained using simulations and experiments, respectively, when the load is resistance and inductance in series.

High-load systems built by N-iX teams are ready to perform under pressure. We build architectures that handle component failures like software and network crash to ensure high availability of user content at any given time. Our goal is zero downtime that is vital for telecom, finance, healthcare, and any other industry. We utilize the most efficient hardware resources when working with large datasets.

development of high-load systems

A high load project is a project that's built with a scalable design. Its framework allows more users to join and more features to be added as the business grows. If you are running a project, for example, a marketing campaign, it should be easy to increase the number of users and integrate new features. The intellection of high load systems came to life almost a decade ago.

Load distribution

Every service and workflow should be designed intuitive and easy-to-use regardless of its complexity. Our developers build efficient and scalable software that maintains the sustainability of the system and backend computing. We offer solutions based on the needs and goals of your business, as well as full support, from development to implementation.

development of high-load systems

However, there are few studies on the stability of liquid hydrogen fuel used in long flights of hypersonic aircrafts and the evaporation of liquid hydrogen fuel during storage. It is foreseeable that more attention will inevitably be paid to the stability of liquid fuels such as liquid hydrogen in future researches. Moreover, with a relatively high density and boiling point, LNG has the potential to be applied to hypersonic aircrafts. In the future, further explorations will be carried out on the feasibility of applying LNG to propulsion systems in the hypersonic mode. Air film cooling mainly refers to a cooling method of isolating the high-temperature fuel gas by laying out some air holes in the upper part of the cooling wall and introducing secondary airflow or fuel to form a cooled air film.

Stress Testing

Maybe one skips the products cards with the highest margins for the company, or studies them, but doesn’t put them in the basket. All this is needed to understand how and what to show to the user. Offshore service providers have less downtime and higher throughput. Even when they encounter a complete server failure, the end-user will not be affected, as the load balancer will immediately route their request to a running server. If the high-load system is highly customizable and provides valuable features, it builds an audience effectively.

The availability of resources can hinder this. When an application grows in the audience, the number of requests naturally grows. And the amount of resources that need to be spent on maintaining interactivity is growing. PDX was a web-based software product that integrated the in-house TV CRM, programming, and inventory maintenance systems. Our team confirms that the system architecture meets customer and user needs according to the initial requirements.

  • To come up with web applications that can be scaled, you should comprehend the basis of how high-performance programs are developed.
  • Besides, the relationship between fuel cooling carbon deposition and fuel cooling efficiency was also investigated to some extent , and a method to detect carbon deposition was proposed and verified.
  • Hundreds of interconnected settings can both “help” the system and spoil its work.
  • The Marx generator was first proposed by German scholar Erwin Otto Marx in 1923.
  • Xing, Y.F.; Zhong, F.Q.; Li, D.X.; Zhang, X.Y. Numerical analysis on the heat transfer of three types of nozzles for the hypersonic long-run wind tunnel.

Only when the electric field intensity reaches a certain degree can the sterilization effect be better, which requires a pulse power with high output. In the process of sterilization, the processing room and liquid food are used as the load of the pulse power supply. Due to the high conductivity of the processing room and liquid food, the resistance value is small, and the pulse power supply outputs a large current, so a high-power and high-voltage pulse power supply is needed. In addition, the structure of the treatment chamber and the types of microorganisms show different load characteristics, which may be resistive, capacitive and even inductive.

High-load Systems Development

When discharging at the maximum pulse width, the voltage value on the series capacitor cannot be reduced to the required minimum voltage value. In this paper, the minimum capacitance of a single capacitor is calculated by . When IGBT does not conduct normally during discharge, the current flow path is shown in Figure 9. N’s conductions are inconsistent, the energy storage capacitor and diode are connected in series and parallel with IGBT, which has the function of voltage clamping. N, the load releases the storage charge and the voltage drops rapidly. The pulse waveform is divided into square wave, exponential attenuation wave and oscillating attenuation wave.

development of high-load systems

In a study by Langener , it was suggested that the fuel should enter the combustion chamber and the outer wall of the exhaust nozzle to be cooled before the combustion, so as to make full use of the waste heat to preheat the fuel. The MR2 aircraft in the European HIKARI project was evaluated in detail at Mach 8. The thermal and energy management cycle structure of this aircraft is shown in Figure 44. The research results provide a powerful theoretical basis for HV-APS as a feasible material to be used in the preparation of adhesive layers in the future. One of the most important stages for developing high load applications because, without proper QA, the main functions and capabilities of the application may suffer. In addition to checking for compliance, quality levels, and bugs, software products are also tested for their ability to withstand heavy loads, process large amounts of data, and handle many complex simultaneous operations.

What is high load?

C/C material can be used for the heat pipe structure at relatively sharp edges, e.g., the air inlet nozzle. A pulse source for high-voltage pulsed electric field sterilization is designed. The pulse source uses IGBT as the main switch device. The whole power supply uses FPGA as the controller to generate control signals, which are isolated by optical fiber, greatly improving the reliability of the system. The driving circuit has an IGBT overcurrent feedback function, which improves the safety of the system. The power supply has a good voltage clamping function and can drive resistive, point inductive and capacitive loads.

DigitalMara success stories

It aggregates important customer activity data daily, runs it through different third-party systems, such as Salesforce, Klaviyo, Kustomer, Evergage. As a result, marketing, sales, management and customer support experts at Printique receive valuable insights, can make data-driven decisions and build efficient strategies. Financial data is also collected daily and processed by Tableau data analytics and visualization tools. The development of high-load web applications and systems like Printique requires serious work at the backend. Printique provides a line of services for pro photographers, such as White Label Galleries and Stores. Our tech team has developed these services with a big focus on pros’ requirements and business goals.

Figure 18.Schematic diagram of the calculation model of the single cooling channel of ramjet . Figure 14.Calculation of thermal conductivity of materials under molecular dynamics simulation . Figure 5.Scanning Electron Microscopy and energy spectrum analysis of carbon deposition of part experimental materials . Chen, X.; Liu, L.; Long, T.; Yue, Z. A reduced order aerothermodynamic modeling framework for hypersonic vehicles based on surrogate and pod. Xing, Y.F.; Zhong, F.Q.; Li, D.X.; Zhang, X.Y. Numerical analysis on the heat transfer of three types of nozzles for the hypersonic long-run wind tunnel. Chang, Z.Z. Heat transfer experimental investigation for piston rod sensor in hydraulic servo actuator of hypersonic combustion ramjet engine vectoring nozzle.

Looking for experts to develop a flexible and scalable high-load web application architecture for your system?

N-iX extended teams build high-load systems and applications for global companies. We design reliable, efficient, and scalable software that handles large volumes of data requests and backend computations. Digiteum has developed custom tools tailored to the needs of different departments.

Over more than 10 years of embedded system development, we’ve created solutions for mass-produced and rare custom-made devices. Knowledge, experience, and strong research skills allow us to build software that runs smoothly on your devices no matter what hardware you use — even if a device is still in production. Apriorit experts can help you boost the intelligence of your business by implementing cutting-edge AI technologies. We provide AI development services to companies in various industries, from healthcare and education to cybersecurity and remote sensing. Does your system have to work with a heavy load constantly, and it can not cope with the processing of all incoming requests? Order the development of a high load project in Geniusee.

At the same pace, the servers quickly fail, so the more there are, the higher is the likelihood that the system will quickly recover after a failure. Table 1.Related parameters of output voltage of pulse power supply. Qin, B.; Zhang, Q.; Barbosa-Canovas, G.V.; Swanson, development of high-load systems B.G.; Pedrow, P.D. Inactivation of microorganisms by pulsed electric fields of different voltage waveforms. Qin, B.; Zhang, Q.; Barbosa-Canovas, G.V.; Swanson, B.G.; Pedrow, P.D. Nonthermal pasteurization of liquid foods using high-intensity pulsed electric fields.


Vaša email adresa neće biti objavljena javno.